Architectural Shingles
Laminated, dimensional shingles that replaced three-tab as the standard. Heavier, better in wind, and longer lasting. Easy to repair and widely available.
Leak after last night's rain? Shingles in the yard after the wind? Call +1-833-818-0925 and get connected with a licensed, insured independent roofer who works in Chester County. A real person answers every call, any hour.

Most Chester County callers reach us after a few unanswered calls to roofers they found online. It might be a leak over the kitchen, a hailstorm that rolled through the county, or a home sale that hinges on a roof report. Whatever the reason, the call gets answered.
County lines matter more in roofing than most people expect. Permit requirements, inspection timing, and even which building code edition applies can vary between the county and the incorporated cities inside it. Your call goes to an independent roofer who works in Chester County and already knows how the local permit process runs.
Plenty of calls from Chester County are routine. Some want a remaining-life opinion on an older home, some need a rental roof fixed between tenants, and some want a second look after a door-knocker's dramatic claims. Those calls get the same careful routing.
Let's be clear up front: Metal Roofing in Bucks is not a roofing company, and we don't pretend to be one. We run a free referral line. When you call +1-833-818-0925, a dispatcher listens to what is happening with your roof, asks the questions a seasoned roofer would ask, and routes your call to an independent, licensed and insured roofing contractor who works in Chester County. From that point on, the quote, the work, and any workmanship warranty belong to that independent contractor.
So why call a referral line instead of a company off a yard sign? Because the hardest part of a roof problem is usually the first hour. You need to know who actually answers at nine at night, who works on standing seam metal instead of only asphalt, who will climb a low-slope commercial roof with a rooftop unit on it, and who handles small repairs instead of chasing only full replacements. Sorting that out by yourself means a dozen phone calls and a lot of voicemail. Our job is to shorten that to one call.
Here is what to expect when you dial. The dispatcher will ask about your roof type and approximate age, whether water is coming inside right now, whether a storm or a falling limb is involved, whether you have opened an insurance claim, and how a contractor can reach the roof safely. Those few details decide which specialist gets routed, which saves you from a wasted first visit. The referral itself costs you nothing.
In the interest of full transparency, here is how this service is funded. The line costs callers nothing; participating independent contractors may pay us a referral fee. That fee never shows up as a separate charge on your quote, and it doesn't change your right to get other bids, ask hard questions, or say no.

A roof leak and a roof replacement are different jobs, often handled by different crews. The independent contractors we route calls to cover the full range below, and the dispatcher's job is to send each call to the pro whose daily work matches your roof. Below is a plain look at what each type of job involves on the roof.
If you're not sure which category your problem falls into, that's normal and it's what the dispatcher is for. Describe what you're seeing, inside and out, and the call gets routed from there.
When water is coming through a ceiling, nobody wants a sales pitch. They want the leak stopped. Emergency calls get routed to contractors who keep reinforced poly tarps, 2x4 battens, cap nails, and roofing cement on the truck. A proper emergency tarp is not a sheet tossed over the ridge with bricks on top. It is stretched past the damaged area, wrapped around battens, and fastened so wind can't get underneath and peel it back. Where a limb has punched through the decking, the contractor may need to cut the broken sheathing back to the rafters before anything can be sealed.
Indoors, keep it simple: kill power to wet fixtures, clear the room, and catch the water. If a ceiling is bulging with trapped water, stay out from under it. Take photos and video before anything is moved, because your insurer will want to see the damage as it was. Most homeowner policies expect you to take reasonable steps to prevent further damage, and a documented temporary repair is usually part of that.
Keep in mind that temporary repairs are meant to buy time, not to last. UV breaks poly tarps down within a few months, and wind works at every fastener. Schedule the permanent repair once the adjuster has visited; a tarp that stays up too long can end up letting water into the very decking it was protecting.
A leaking roof is not automatically a dead roof. The most common repair calls we hear about come down to a handful of parts: cracked rubber collars on plumbing vent boots, loose or rusted step flashing where a roof meets a sidewall, nail pops that have pushed up through a shingle, wind-lifted tabs whose sealant strip has let go, and worn ridge cap. Each of those is a small, specific fix when it is caught early.
A good repair contractor will also tell you when a patch is the wrong answer. If shingles are brittle enough to crack when lifted, if granules are washing into the gutters by the handful, or if the same slope keeps leaking in new places, the conversation shifts. Matching matters too: older three-tab shingles and discontinued colors don't always blend, so ask to see a sample first. Expect a written scope that names the exact components being replaced.
Flashing is behind a surprising share of repair calls. Chimneys need step flashing tied into the shingles plus counterflashing cut into the mortar joints, and wide chimneys need a cricket on the uphill side to split the water. Skylights fail at the curb flashing more often than at the glass. A repair that only smears roofing cement over these spots tends to fail again within a season or two, so ask how the flashing will actually be rebuilt.

When a roof reaches the end of its life, the quality of the replacement comes down to the layers you never see. On a full tear-off, the contractor strips the old roofing to the deck, then checks the sheathing for soft spots, delamination, and rot. Bad decking gets replaced before anything else goes down. After that comes drip edge, ice and water shield at eaves and valleys where code or climate calls for it, synthetic underlayment, starter course, the field shingles or panels, and finally ridge vents and flashing.
One detail many bids skip is ventilation. Intake at the soffits and exhaust at the ridge need to be balanced, or heat and moisture build up in the attic and shorten the life of the new roof. Ask each contractor about their venting plan, the permit, and who schedules the final inspection. New construction, additions, and garage roofs follow the same rules, with extra care at tie-ins where a new roof plane meets an old one. A clean job ends with a magnetic sweep of the yard and driveway for stray nails.
When you compare replacement bids, compare the scope, not just the total. Look for how many layers are being removed, the price per sheet for any decking replacement, the brand and type of underlayment, whether ice and water shield is included and where, how the ventilation will be handled, and whether drip edge and pipe boots are new or reused. A low bid that reuses worn flashing or leaves out ice barrier often costs more in the long run.
Metal is its own trade within roofing, and it pays to reach someone who installs it routinely. Standing seam systems hide their fasteners and use clips that let the panels expand and contract with temperature. Exposed-fastener panels, the ribbed style common on barns, shops, and many homes, are screwed straight through the face, and each screw relies on a rubber washer to stay watertight. After years of sun those washers dry out and crack, and the screws back out a little more every season.
Many metal roof leaks are fixed by replacing worn screws with slightly oversized ones and new washers, resealing laps, and replacing tired closure strips at the ridge and eaves. For new metal roofs, the contractor will talk through panel profile, gauge, and finish, and whether snow guards make sense over doors and walkways. If you are thinking about metal over an existing shingle roof, ask how they will handle the substrate and ventilation.
Rain noise is the question everyone asks about metal. Over solid decking with underlayment and attic insulation, it is usually no louder than shingles. Metal over open purlins on a barn is a different story, and that is the sound most people remember. Metal also weighs less than most other roofing, sheds snow well when installed with the right details, and lasts for decades with basic upkeep.

Flat and low-slope roofs on stores, offices, warehouses, churches, and apartment buildings are a separate specialty. The common systems are TPO and PVC single-ply membranes with heat-welded seams, EPDM rubber, modified bitumen, and older built-up roofs. Leaks usually trace back to transitions, such as HVAC curbs, drains, scuppers, and the flashing up parapet walls.
Standing water that lingers for days after a rain is a warning, not a cosmetic issue. It points to clogged drains, sagging deck, or insulation that has compressed. Commercial contractors may take core cuts or use an infrared moisture survey to map wet insulation under the membrane, which tells you whether a repair, a restoration coating, or a re-roof is the smart spend. If your tenants or customers can't be disrupted, ask about after-hours scheduling.
Restoration coatings have changed the math on a lot of commercial roofs. If the membrane is mostly dry and structurally sound, a silicone or acrylic coating system over repaired seams can add years of service at a fraction of re-roof cost. If moisture surveys show widespread wet insulation, though, coating over it just traps the problem. A good contractor will show you the moisture data before recommending either route.
After hail or high wind, the damage is not always visible from the ground. Hail can bruise shingles and fracture the mat underneath while leaving the surface looking fine at a glance, and wind can break the seal on tabs without tearing them off. An experienced pro checks dents in gutters and vent caps first, then examines test squares on each roof slope. That documentation helps when you meet your insurance adjuster. Be wary of anyone who offers to cover your deductible; in many places that is illegal.
Plenty of inspection calls have nothing to do with weather. Home buyers, sellers, and owners who received a letter from their insurer about roof condition all call for inspections. A thorough one covers the roof surface, flashing, ventilation, and the attic side, where daylight through the decking or dark stains on rafters tell their own story. Simple upkeep, like clean gutters, resealed flashing, and trimmed branches, stretches the life of almost any roof.
Most roofs need only a little regular attention. Look at the roof from the ground each spring and fall, and after any major storm. Check for missing or lifted shingles, dark streaks, sagging lines along the ridge, and granules piling up at downspout outlets. And after a heavy rain, a quick look around the attic with a flashlight is one of the best checks you can do. If anything looks off, call for a professional look before the next storm season.
Not sure what is on your roof? Here's a quick field guide to the materials contractors in our network work with every week.
Laminated, dimensional shingles that replaced three-tab as the standard. Heavier, better in wind, and longer lasting. Easy to repair and widely available.
The thin, flat shingles common on roofs from earlier decades. Many are now past their prime, and finding an exact color match for repairs can be difficult. Usually a signal that replacement planning should start soon.
Concealed-fastener metal panels with raised seams. Lasts for decades, sheds snow, and avoids exposed screws entirely. Higher upfront cost than shingles.
The ribbed, screw-down panels seen on outbuildings and many homes. Cost-effective and tough, though fasteners need checking every several years.
Heavy, long-lasting tiles common in warm and coastal climates. The tile itself can last for generations; it is usually the underlayment underneath that wears out. Walking on tile takes care and experience.
The workhorse membranes on flat and low-slope roofs. TPO and PVC have heat-welded seams, EPDM is a rubber sheet glued or ballasted, and modified bitumen goes down in torch-applied or self-adhered layers. Each has its own repair methods.
The process is short and simple, and nothing happens without your go-ahead.
After you hang up, the contractor usually calls you directly to confirm the address and a time window. If you don't hear back as expected, call the line again and the dispatcher will follow up or route you to someone else. You are never obligated to hire anyone we connect you with.
Call +1-833-818-0925 day or night and a real person answers, with no forms and no call-back queue.
A few quick questions about the roof, the damage, and any insurance claim help us route the call correctly.
We connect you with an independent local roofer whose work matches your roof and your problem.
On site, the pro looks the roof over, shows you photos, and puts the price in writing before starting.
After you approve, the work gets done, the site gets cleaned, and the contractor reviews the finished job with you.
Expect a good contractor to look at these on the first visit:
A referral line is only worth calling if it makes the next hour easier. Here is what you can count on from us, and what is up to the contractor.
Some things are within our control, like answering fast and routing well. The work itself is the contractor's, and we say so plainly.
The contractors in our network quote in writing before work starts, so there are no surprise line items after the shingles come off. If a quote is vague, ask for the scope to be itemized.
Our dispatch line answers around the clock, including weekends and holidays. Arrival times vary with storms and distance, and you will hear a realistic estimate, not a sales line.
Your call goes to someone who works locally and already knows the permit process and the common roof problems nearby.
We connect you with independent contractors who represent that they carry the licensing and insurance their work requires. Before work starts, ask for a certificate of insurance and confirm any required license with your local or state agency.
Asphalt, metal, tile, and flat membrane roofs each need different tools and experience. The dispatcher's whole job is matching your roof type and problem to the right kind of pro.
Not happy with the first connection? Call again and we'll work to route you to another local contractor. The referral is always free.
Because the network includes repair-focused pros, a small problem gets treated as a small problem. Doubt a replacement recommendation? Call back and ask for a second look.
A homeowner with a shingle leak and a property manager with a flat roof need different contractors, and the call gets routed accordingly. That keeps the first visit productive instead of a wasted trip.

Whoever you hire, these are the questions worth asking first. Watch for red flags too: pressure to sign the same day, a large cash deposit before materials arrive, an offer to cover your insurance deductible, or a contractor who won't put the scope in writing.
These are the kinds of calls that come in every week, and how they usually play out.

A storm drops a limb through the garage roof just before midnight. The dispatcher flags it as active damage and routes it to a contractor with emergency tarping gear, who covers the opening that night and comes back to quote the decking and shingle repair once the insurer has seen it.
A water spot shows up only during sideways rain. The roofer traces it to step flashing at a wall, and the repair is small and specific. The owner keeps the roof, fixes the flashing, and the stain never comes back.
After a hailstorm, three different crews knock on the door the same afternoon. The owner calls the line instead, gets connected with a local contractor who documents dents on the gutters and vents and bruising in test squares, and meets the adjuster with photos in hand.
With closing around the corner, a vague inspection note threatens the deal. A roofer's itemized report with photos turns it into two clear repairs that get done before closing. The buyer gets the paperwork, and the sale stays on schedule.
Every rain brings a drip near the kitchen hood. A low-slope specialist clears a blocked drain, repairs the seam at the curb, and works before the lunch rush. The owner also gets a note about drain cleaning so it doesn't happen again next season.
An older exposed-fastener roof drips from many screw holes. A metal specialist swaps the fasteners and reseals the laps instead of replacing panels. The roof stays in service for years, and the owner spends a fraction of what new metal would cost.
These are composite examples of the kinds of calls we route, written to show how the process works. They are not individual customer reviews.
It depends on where you are in Chester County, the weather, and contractor schedules that day. For active leaks, many Chester County callers get a visit the same day or the next morning, and the dispatcher will be upfront about timing. After a big storm, waits run longer because everyone needs a roofer at once.
Calls from rural roads and unincorporated communities in Chester County are welcome. Availability can be thinner far from town, and some contractors charge a trip fee for longer drives, so ask about that when they call you.
Replacements generally need a permit; repairs often don't. Which office issues it depends on whether your property sits inside city limits. Ask the contractor to pull the permit and book the final inspection. Unpermitted roof work can cause trouble when you sell or file a claim.
Yes. Many buyers call for a roofing contractor's inspection after the general home inspector notes roof concerns. A roofer can estimate remaining life, document specific defects with photos, and price any repairs, which gives you something concrete to negotiate with.
Metal Roofing in Bucks doesn't set prices, because the independent contractor does the work. What you should expect is a written quote after the roof has been looked at and before any work starts. A good quote lists materials, any per-sheet decking charge, permit costs, and cleanup. Calling the referral line is free.
Most emergency calls involve active leaks, storm or tree damage, or wind-blown shingles and panels that need a temporary cover. The contractor will usually tarp or seal the area first, document the damage, and quote the permanent repair once it is safe and dry. If there is sparking, a sagging ceiling, or structural collapse, call 911 first.
Our network is made up of independent licensed and insured contractors. Licensing rules vary from place to place, so always ask for the contractor's license information and a certificate of insurance before work starts, and verify it yourself. That check takes five minutes and is worth it.
Many contractors will document damage with photos and measurements and meet your adjuster on the roof, which helps the adjuster see what you're seeing. Your policy and claim decisions stay between you and your insurance company. Read your policy for deductible and depreciation terms, and be cautious of anyone offering to cover your deductible.
It mostly comes down to roof age, shingle condition, and whether the problem is isolated. One failed pipe boot on a ten-year-old roof is a repair. Brittle, curling shingles, heavy granule loss, and leaks in several places on an older roof usually point to replacement. Ask the contractor to show you photos of what they found either way.
A typical house re-roof takes one to three working days. Metal, tile, and large commercial roofs take longer. The contractor will usually schedule around the forecast, and decking surprises can add a day.
Calls come in from all over Chester County: the county seat, small towns, subdivisions, and farm properties. Each call goes to an independent contractor who already works in the county.
Chester County has a little of everything when it comes to roofs. Older homes may have two or three layers of shingles that have to come off before a new roof goes on. Newer subdivisions mostly have architectural shingles that are reaching their first replacement. Farm buildings and shops often have exposed-fastener metal, and commercial strips usually have low-slope membranes. Each type goes to a contractor who works on it routinely.
Property type matters as much as location. A metal pole barn, a 1950s ranch with two layers of shingles, and a strip center with a rubber membrane each go to a different kind of contractor, and the dispatcher sorts that out on the first call.
Weather in Chester County leaves its mark on roofs in predictable ways. Wind lifts tabs, heavy rain finds weak flashing, and sun dries out the sealant around vents. Contractors who work in the county see these patterns every season and know where to look first.
Timing matters too. After a widespread storm, every roofer in Chester County gets busy at once, and the dispatcher will tell you honestly what wait to expect. For non-urgent work, calling outside storm season usually makes things easier.
Below you'll find the cities and zip codes in Chester County. Pick yours, or call +1-833-818-0925 and we'll route you.

Dial +1-833-818-0925 day or night for an independent local roofing contractor in Chester County, at no cost to you.